821697: AMP1-16 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
66
Chapter 5 Menu List
Unit Information Menu
Figure 5–21 Unit Information Menu - Ethernet and
Serial Port Configuration
• ENABLE FTP: This button label only appears when the
S/W Update menu is selected, as in Figure 5–22. It is used as part
of the software update procedure.
• S/W Update: Press this button to begin the software update process.
Instructions then appear on the screen as follows:
Figure 5–22 Unit Information Menu - Software
Update Instructions
Unit S/W Info
S/W Update
Ethernet Port Configuration
IP Address: 0.0.0.0
MAC Address: 00:03:f4:02:97:55
Serial (RS-232) Port Configuration
Baud Rate: 115200
Parity: None
Data Bits: 8
Stop Bits: 1
Handshaking: None
Network Mask: 0.0.0.0
Gateway: 0.0.0.0
DNS: 0.0.0.0
Serial/
Ethernet Info
Unit Information Menu
Unit S/W Info
Serial /
Ethernet Info
ENABLE FTP
Software Update Instructions
ftp://0.0.0.0/
See also the instructions sent with the software
update package provided by Wohler.
Now, press ENABLE FTP to enable the internal
FTP server, or press any other screen control
to cancel.
Once software updates are enabled, this screen
will go blank. Unplug and then re-power the unit
to halt the FTP server and cause it to restart .
Unit S/W Info
Unit Information Menu
Comments to this Manuals