Wohler AMP1-VS User's Guide download pdf (Page 99)

821697: AMP1-16 Series User Guide

Appendix B Establishing Connectivity

Connecting to a LAN

Setting the IP Address and Network Mask

1. An IP address of 0.0.0.0 means the Netburner is using DHCP

addressing, and the network will give the module its address (as it has in

the example in Figure B–1 above: 192.168.0.7). With these

procedures, you can also enter a fixed network address and mask if

desired. You can use any network address and mask approved by your

network administrator. For our example, we’ll be using the address

192.168.0.2 with the network mask of 255.255.255.0. Simply type

the IP address into the IP field and the network mask into the

Network Mask field.

Figure B–2 NetBurner IPSetup Dialog - With IP

Address and Net Mask

2. Press the

Set button and wait approximately 30 seconds. If the

NetBurner module does not appear with the new address, press the

Search Again button. The window should now look like the one

shown in Figure B–3 below.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 109 110

No comments

Wohler AMP1-VS User's Guide Page 99