Wohler AMP2A-VTR User's Guide download pdf (Page 20)

821030: AMPx-S8 Series User Guide

Chapter 2 System Overview

Front Panel Controls

• Level Meter Brightness (Potentiometers, Left and Right): Use a

small slot screwdriver to adjust the brightness of the bar graph

meters using these two recessed trim pot controls. The left control

adjusts the brightness of the left four LED bar graphs and the right

control adjusts the brightness of the right four bar graphs.

Clockwise rotation increases the brightness.

• Speaker Assign LEDs (1 through 8, Left and Right): These LEDs

indicate the speaker mix of selected channels. The speaker assign

LEDs are located above each of the 53-segment bar graphs.

• Speaker Assign/Preset Buttons (Speaker Assign, 1 through 8;

Preset Buttons, 1 through 4): Pressing any of these buttons selects

the channels to be summed into either or both speaker channels, or

to create and recall presets when used in conjunction with the

button. Refer to Chapter 4 on page 37 for more information about

presets.

LCD Screen

The LCD screen displays various parameters and settings, and is also

used to configure/program the monitor. The features of the LCD

screen (shown in Figure 2–3 through ) include:

• Mix Status: Displayed on the top right and top left corners of the

LCD screen, the

Mix Status indicates how the current input signal

is mixed to the internal speakers.

• Source Status: Displayed in the top center of the LCD screen, the

Source Status indicates the current signal type and current input

currently audible in the internal speakers. If a preset has been

recalled, this area displays the name of the preset until a monitoring

or input change is made.

• SDI Groups: Displayed in the bottom left and bottom right corners

of the LCD screen, these groups indicate the SDI channels that are

currently mixed to the internal speakers.

• Input Lock Status (Digital Inputs Only): Displayed in the center of

bottom line, the

Input Lock Status shows the lock status of the

selected digital input(s). If any input channel pairs are not locked,

Note:

The AMP1s only have one brightness control.

Note:

In the AMP1s, the speaker assign LEDs are the top

segment of the meters.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 73 74

Comments to this Manuals

No comments

Wohler AMP2A-VTR User's Guide Page 20

Comments to this Manuals

Related products and manuals for Soundbar speakers Wohler AMP2A-VTR