821030: AMPx-S8 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
36
Chapter 3 Audio Configuration
Terminating/Unterminating Inputs
4. Press the Up or the Down buttons until the desired input is shown
on the screen.
5. Press the Enter key to change the termination setting for that
input.
6. To exit the menu, press the
Up or Down arrow buttons until Save
and Exit appears in the LCD, as shown in Figure 3–17 below.
Figure 3–17 Saving and Exiting the Termination
Settings
7. To exit the Setup menu without saving your changes, press
Escape.
The termination selection order is:
• Unbalanced 1
• Unbalanced 2
• Unbalanced 3
• Unbalanced 4
• Balanced 1
• Balanced 2
• Balanced 3
• Balanced 4
• Save and Exit
Important:
Repeat Steps 4 and 5 until all the inputs have been set according to
your needs.
AES Termination
Save and Exit
Comments to this Manuals