Wohler AMP2-DA User's Guide download pdf (Page 58)

821016: AMPx-E8 Series User Guide

Chapter 4 Presets

Methods of Accessing the Presets

Saving a Preset

1. Press Fn+Preset 1.

If Preset 1 is currently empty, the system will prompt you to save

the current unit configuration to Preset 1.

2. Name the preset by using the Up and Down arrow buttons to

scroll through the available list of characters. Press Enter to accept

each character.

3. When you’re done entering all the characters, scroll until _DONE_

appears in the window, and press

Enter.

Recalling a Preset

If, after pressing Fn+Preset 1, the preset is not empty, the system will

prompt you to recall Preset 1, and Preset 1's name will appear in the

LCD. If you press Enter, the system will recall the preset.

Overwriting a Preset

If, after pressing Fn+Preset 1, the preset is not empty, the system will

prompt you to recall Preset 1, and Preset 1's name will appear in the

LCD.

1. If you press

Escape while the preset recall prompt is showing, the

system will ask you if you want to overwrite the preset. If you

want to overwrite the preset with the unit's current settings, press

Enter.

2. Press Enter to continue.

3. Save Old Name? will appear, with the selected preset number

and current name below it. If you wish to use the name displayed,

press

Enter, and skip the rest of the following instructions. Your

current settings are now stored in the selected preset.

Otherwise, if you wish to enter a new name, continue on with

Step 4 below.

4. Press Escape.

Note:

_DONE_ is located between the lowercase letters and

before the numbers.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 89 90

No comments

Wohler AMP2-DA User's Guide Page 58