Wohler AMP2-DA User's Guide download pdf (Page 37)

821016: AMPx-E8 Series User Guide

Chapter 2 System Overview

Channel Selection and Mixing

3. Press the Input key until the selected input (SDI1 or SDI2) is

shown in the LCD.

4. Then press the Group button until the pair containing the Dolby

signal is shown in the display (i.e., G1 3/4).

Channel Selection and Mixing

To produce audio through the internal speakers, press each of the

Speaker Assign buttons ( on page 23) until each channel is output

through the speaker of your choice. See Table 2–10.

Note:

The level meters will operate automatically, displaying

volume levels for each channel carrying an input signal.

Table 2–10 Speaker Assign Button Functionality

Button Press LED Color Speaker

1st Steady Green Left

2nd Flashing Green/Amber Both

3rd Steady Amber Right

4th Off Neither

AES

Example:

Suppose you are monitoring an AES pair connected to the unbalanced

AES/PCM In 1. When AES1 is selected for input, the left channel of

the AES pair will appear on the meter for Channel 1, and the right on

Channel 2. Press the Speaker Assign button for Channel 1 until the

Channel LED turns green. Press the

Speaker Assign button for

Channel 2 until the Channel LED turns amber. The left channel of the

AES pair now sounds in the left speaker, and the right channel in the

right speaker.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 89 90

No comments

Wohler AMP2-DA User's Guide Page 37